|
|
| |
Prof. Kim's Publications
REFEREED JOURNAL PAPERS
31. Sun, L., Kwon, P., Kim, D., Beavers, K., ¡°Process toward a Denser Metal Matrix Composite Using Three Dimensional Printing Method,¡± Submitted to the Transactions of NAMRI/SME (10/1/2007).
30. Wan, Y. Kim, D., Park, Y., Joo, S., ¡°Experimental Investigation of the Machinability of Polymethylmethacrylate (PMMA)/Multi-Walled Carbon Nanotube (MWCNT) Nanocomposites in Micro Electro Discharge Machining,¡± Submitted to the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture (9/20/2007).
29. Jang, J., Kim, D., Cho, M., ¡°The Effect of Cold Expansion on the Fatigue Life of the Chamfered Holes,¡± Submitted to the ASME Journal of Engineering Materials and Technology (9/7/2007).
28. Allen, P., Kim, D., Chen. L., ¡°Micro-Electrical Discharge Drilling Characteristics on Molybdenum Aperture Fabrication,¡± Submitted to the International Journal of Advanced Manufacturing Technology (8/15/2007).
27. Lee, J., Kim, D., Li, W., ¡°Process modeling and experimentation of a cordless resistance soldering system,¡± Submitted to the International Journal of Advanced Manufacturing Technology (5/15/2007).
26. Ramulu, M., Kim, D., Kao, H., Rao, P. N., "Experimental Modeling and Analysis of Drilling (Al2O3)p/6061 Metal Matrix Composites Using PCD Tool," In Press, International Journal of Materials and Product Technology.
25. Blake, D., Kim, D., "Effect of Weld Quality on Fatigue Life of Post-Weld Cold Worked 1008 Resistance Spot Weld Joints," Transactions of NAMRI/SME, Vol 35, pp. 327-334, 2007.
24. Kim, D., Ramulu, M., "Study on the drilling of Titanium/Graphite Hybrid Composites," ASME Journal of Engineering Materials and Technology, Vol. 129, pp. 390-396, 2007.
23. Kim, D., Blake, D., Ryu, S.-J., Lim, B.-S., "A Study on Fatigue Strength Improvement of Aluminum Alloy Resistant Spot Welds by Cold Working," Materials Science Forum, Vols 539-543, pp. 3961-3966, 2007.
22. Kim, D., Xu, J., Li,W., Blake, D., "Force Characteristics of Self-Piercing Riveting," Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 220, No. 8, pp.1259-1266, 2006.
21. D. Kim, P. Allen, H. Shin, T. Nam., "Effect of Cold Working on Exit Burr Formation in Drilling," Transactions of NAMRI/SME, Vol 34,pp.317-324, 2006.
20. Lim, B, Ryu, S., Blake, D., Kim, D., "Improvement of fatigue life in post-weld cold worked aluminum resistant spot welds," International Journal of Automotive Technology, Vol. 7, No.5, pp 579-584, 2006.
19. Y. Seo, D. Kim, and M. Ramulu, "Electrical Discharge Machining of Functionally Graded 15 - 35 Vol% SiCp/Al Composites,Materials and Manufacturing Processes, Vol. 21, pp. 475-483, 2006.
18. Kim, D., Spitsen, R., Li, W., Lim, B., The Feasibility Study of Post-Weld Cold Working Processes to Improve the Fatigue Strength of Aluminum Resistance Spot Welds, Transactions of NAMRI/SME, Vol. 33. pp.251-258.2005.
17. Kim, D., Ramulu, M., Pedersen, W.Machinability of Titanium/Graphite Hybrid Composites in Drilling," Transactions of NAMRI/SME, Vol. 33. pp. 445-452. 2005.
16. B. S. Lim, B. J. Kim, D. Kim, J. W. Kim, and D. B. Lee, "Influence of Dwell Time on Creep-Fatigue Crack Growth Behavior of P92 Steel Weldment at High Temperature," Key Engineering Materials, Vol. 297-300, Part 1-4, pp.794-798, 2005.
15. Spitsen, R., Kim, D., Flinn, B., Ramulu, M., and Easterbrook, E.T.,"The Effects of Post-Weld Cold Working Processes on the Fatigue Strength of Low Carbon Steel Resistance Spot Welds," Journal of Manufacturing Science and Engineering, Vol 127, pp.718-723, 2005.
14. Kim, D., Doan, X. and Ramulu, M., Drilling performance and machinability of PIXA-M and PEEK thermoplastic composites,?Journal of Thermoplastic Composite Materials, Vol. 18 No. 3, pp. 195-217, MAY 2005.
13. Kim, D., and Ramulu, M., Frequency Analysis and Process Monitoring in Drilling of Composite Materials,?Advanced Composites Letters, Vol. 13, No. 4, pp. 185-192, 2004.
12. Seo, Y.W., Kim, D.W. and Ramulu, M., Surface Characteristics of Abrasive Waterjet Machined Titanium Alloy, Journal of Jet Flow Engineering, Vol. 21, No. 2 pp.13-21, 2004.
11. Ramulu, M., Stickler, P.B., McDevitt, N.S., Datar, I.P., Kim, D., and Jenkins, M.G., Influence of processing methods on the tensile and flexure properties of high temperature composites, Composite Science & Technology, Vol. 64, pp. 1763?772, 2004.
10. Kim, D., Ramulu, M. "Cryogenically Treated Carbide Tool Performance in Drilling Thermoplastic Composites," Transactions of NAMRI/SME, Vol. 32, pp. 79-85, 2004.
9. Ramulu, M., Kuo, S.-Y., Chen, Y.-M., Kim, D., Spitsen, R., Cutting Characteristics of Preform and SMC Composites," Transactions of NAMRI/SME, Vol. 32, pp. 239-246, 2004.
8. Kim, D., and Ramulu, M., Drilling process optimization for graphite/bismaleimide- titanium alloy stacks, Composite Structures, Vol 63, pp. 101-114, 2004.
7. Seo, Y., Ramulu, M., and Kim, D., Machinability of Ti alloys on the abrasive waterjet machining process, Proceedings of the Institution of Mechanical Engineers, Part B Journal of Engineering Manufacture, Vol. 217, pp. 1709 ?1721, 2003.
6. Kim, D., Seo, Y.W., Ramulu, M., and Pedersen, E. W., EDM Characteristics of 15 and 35 Vol.% SiCp/Al metal matrix composites, Transactions of NAMRI/SME, Vol. 31, pp. 241-248, 2003.
5. Ramulu, M., Kim, D., Rao, P.N., and Kao, H., Experimental study of (Al2O3)p/6061 metal matrix composites using PCD Tool, Transactions of NAMRI/SME, Vol. 31, pp. 169-176, 2003.
4. Ramulu, M., Kim, D., and Choi, G., Frequency analysis and characterization in orthogonal cutting of glass fiber reinforced composites, Composites A: Applied Science and Manufacturing, Vol. 34, pp.949-962, 2003.
3. Ramulu, M., Branson, T. and Kim, D., A study on the drilling of graphite / Bismaleimide composite and titanium stacks, Composite Structures, Vol. 54, No.1, pp.67-77, 2001.
2. Kim, D., and Lim, B., Plasma and vacuum carburizing process and mechanical properties of SCM415 steel, KSME International Journal, Vol. 13, No. 8, pp. 634 - 641, 1999.
1. Kim, D., Kim, S., and Lim, B., Surface hardening characteristics on plasma carburized SCM415 steel, Journal of Korea Research Society of Materials, Vol. 8, No. 8, pp. 707-713, 1998. (In Korean)
CONFERENCE PROCEEDINGS
Wan, Y., Kim, D., Jang, J., Park, Y., ¡°Micro Electrical Discharge Machining of CNT-Based Nanocomposite Materials,¡± the Proceedings of ASME-IMECE, November 11-15, Seattle, WA.
Jang, J., Kim, D., Cho, M., ¡°The Effect of Cold Expansion on the Fatigue Life of the Chamfered Holes,¡± the Proceedings of ASME-IMECE, November 11-15, Seattle, WA.
Kim, D., Jang, J., Ramulu, M., ¡°Hole Quality in Drilling of Hybrid Titanium Composite Laminate(HTCL),¡± the Proceedings of the American Society for Composites?Twenty-second Technical Conference, September 17-19, 2007. Seattle, WA.
Park, Y., Kim, D., Wan, Y., Zhang, C., Cook, Y., ¡°Micro Electrical Discharge Machining of Polymer/Carbon Nanotube Composites,¡± the Proceedings of SAMPE 2007 Spring Conference, June 3-7, 2007, Baltimore, Maryland.
Kim, D., Gurocak, B.H., ¡°Design Panel: A Tool for Assessment in Design Courses,¡± Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007, Honolulu, HI.
Kim, D., Flaman, M., ¡°Implementing Machining of Fiber Reinforced Polymer Composites to Manufacturing Courses in 2 Year and 4 Year Programs,¡± Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007,Honolulu, HI.
Jokar, A., Gurocak, B.H., Kim, D., Chen, X., Rad, H., ¡°Multi-Dimensional and Interactive Learning Model for Introduction to Mechanical Engineering,¡± Proceedings of ASEE 2007 Annual Conference and Exposition, June 24-27, 2007, Honolulu, HI.
Kim, M., Kim, D., Lim, B., ¡°Fatigue life improvement by cold working in steel resistant spot welds for automotive body applications,¡± Proceedings of Korean Society of Automotive Engineers 2006 Spring Conference (In Korean).
D. Kim, S.J. Ryu, D. Blake, B.S. Lim, "A study on fatigue strength improvement of aluminum alloy resistant spot welds by cold working," Proceedings of International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2006, Vancouver BC, Canada, July 4-8, 2006.
kim, D., Jewett, J., "Collaborative Class Projects between the Manufacturing Engineering Program and the Child Development Program," Proceedings of 2006 Society of American Engineering Educators Annual Conference & Exposition, Chicago, IL.
Kim, B., Ryu, S., Lim, B., Kim, D., "Study of Fatigue Behavior in Post-Weld Cold Worked Aluminum Spot Welds" Proceedings of Korean Society of Automotive Engineers 2005 Fall Conference.(In Korean)
Phil Allen, Xiaolin Chen, and Dave Kim, "Numerical and Experimental Study on Micro-Electrical Discharge Micromachining Characteristics on Molybdenum," Proceedings of ASME-IMECE, November, Orlando, FL.
Kim, D., Ramulu, M., "Study on the drilling of Titanium/Graphite Hybrid Composites, Proceedings of ASME-IMECE, November, Orlando, FL.
D. Kim, M. Ramulu, Cutting and Drilling Characteristics of Hybrid Titanium Composite Laminate (HTCL), Proceedings of the SAMPE 2005, Seattle.
M. Ramulu, L.C..Parafitt, P. B. Stickler and D. Kim, Influence of Manufacturing Process and Fiber Volume on Edge Finishing Characteristics and Surface Integrity of Glass Fiber Reinforced Plastic Composites, Proceedings of the SAMPE 2005, Seattle.
Lim, B, Ryu, S., Blake, D., Kim, D., Improvement of fatigue life in post-weld cold worked aluminum resistant spot welds, Proceedings of the 13th International Pacific Conference on Automobile Engineers 2005.
Kim, D., Chen, X., Gurocak, H., "Outreach Program with Summer Camps and Engineering Workshops," Proceedings of 2005 Society of American Engineering Educators Annual Conference & Exposition, Portland, OR.
Kim, D., Stoebe, T., Cossette, I., "Manufacturing Technology Curriculum Research and Development for High Schools and Colleges in Washington State," Proceedings of 2005 Society of American Engineering Educators Annual Conference & Exposition, Portland, OR.
D. Blake, R. Spitsen, D. Kim, B. D. Flinn, M. Ramulu, Weld Quality Effects on Fatigue Enhancement of Resistance Spot Welds,?Proceedings of the 2005 Society of Experimental Mechanics, June 7-9, Portland.
Flinn, B., Spitsen, R., Kim, D., Nam, T., Easterbrook, E.T.,"Fatigue Strength Improvement of Low Carbon Steel Resistance Spot Welds by the StressWaveTM Process,?SAE Technical Paper 2005-01-0903.
Lim, B., Ryu, S., Kim, D., "Improvement of fatigue strength in Al alloy spot-welds by cold working" Proceedings of Korean Society of Automotive Engineers 2005 Spring Conference.(In Korean)
Spitsen, R., Kim, D., Flinn, B., Ramulu, M., and Easterbrook, E.T.,"The Effects of Post-Weld Cold Working Processes on the Fatigue Strength of Low Carbon Steel Resistance Spot Welds," Proceedings of ASME IMECE 2004, November 13-19, 2004, Anaheim, CA.
Ramulu, M., Stickler, P., Kim, D. "Influence of Manufacturing Process and Fiber Volume in Edge Finishing Characteristics of GFRP Composites," Proceedings of 11th US-Japan Conference on Composite Materials, September 9-11, 2004, Yamagata University, Yonezawa, Yamagata, Japan.
Kim, D. Cossette, I., “An Outreach Program To Promote Manufacturing Careers To Underrepresented Students,?Proceedings of 2004 Society of American Engineering Educators Annual Conference & Exposition, Salt Lake City, UT.
Seo, Y.W., Kim, D., and Ramulu, M., Abrasive waterjet machined surface characteristics of titanium alloy (Ti6Al6V), Proceedings of the 7th Pacific Rim International Conference on Water Jetting Technology, pp. 331-340, 2003.
Kim, D., Ramulu, M., Process optimization on the drilling of composite and titanium stacks, Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002.
Kim, D., Ramulu, M., Effects of Processing Methods on the Drilling Performance of PIXA-M Thermoplastic Composites, Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 8-11, 2002.
Kim, D., Ramulu, M., and Garbini, J., Hole Quality in Drilling of Graphite/Bismalemide-Titanium Stacks, Proceedings of the 33rd International SAMPE Technical Conference, pp. 1315-1326, 2001.
Ramulu, M., Branson, T. and Kim, D., An investigation on the drilling of graphite / bismaleimide composite and titanium stacks, Proceedings of ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 5 - 10, 2000.
Kim, D., Kim, H., Kim, M., and Lim, B., Plasma and vacuum carburizing process and mechanical properties of SCM415 steel, Proceedings of the 10th International Pacific Conference on Automobile Engineers, Vol.1, pp. 31-36, 1999.
Kim, D., Lim, B., Surface hardening characteristics on plasma carburized SCM415 steel, Proceedings of Korea Research Society of Materials '98 Spring Conference, Vol. 1, p. 34, 1998. (In Korean)
Kim, D., Lee, Y., and Lim, B., A study on mechanical properties of vacuum carburized SCM415 steel, Proceedings of Korea Society of Automobile Engineers '98 Spring Conference, Vol. 2, 743-748, 1998.(In Korean)
|
|
